Multireg DIN+- thermostat 3600W 16A

Electronic thermostat for snow melting

EOL

Art. no. 5430166

EAN/GTIN no. 7071236015468

Download Documents

Product information

Data sheet

Product documents

dimensions multireg din.pdf

Installation documents

Manual

Text Download

General description

This text may be copied and used for marketing purposes of this product.

Multireg DIN± is a thermostat specifically designed to control heating cables in gutters, steps, walkways, driveways etc. where ice buildup may occur. The thermostat may also be used for frost protection of water pipes.

Function 1: DIN± thermostat
Ice buildup happens within a certain temperature interval, and
by using outdoor heating cables, this ice formation may be counteracted. Multireg DIN± is designed to control the heat supply only within the critical area, in order for defrosting to be achieved using a minimum of power. The critical temperature range varies from one installation to another, hence the thermostat is equipped with a start and stop temperature setting. The thermostat is placed indoors, e.g. in a fuse box, while the sensor is placed outside, e.g. on a wall. After a few adjustments, the thermostat is set to a temperature interval where no ice or icicles are formed, and the installation runs itself with minimal energy consumption.

Function 2: Power regulator
By connecting terminals 1 and 2 (REG) using a jumper wire, the Multireg DIN± will act as a power regulator. This function works well for frost protecting water pipes. Set the desired temperature for when the system should switch on. Customize the output as needed.

Click this icon to copy clean and unformatted text

Areas of use

This text may be copied and used for marketing purposes of this product.

Click this icon to copy clean and unformatted text